Payload:8 - 18 kg / 17.6 - 39.68 lbs
Counter balance:Continuous
Pan Drag:Continuous
Tilt Drag:Continuous
Tilt Angle:+85deg. / -85deg.
LED Level Illumination:Yes
Camera plate:slide plate
Plate attachment:1/4'' & 3/8'' screw
Spare Screw:3/8'' screw 2 pcs
Slide Range:+50 / -50mm
Height:84 to 168cm / 33.1'' to 66.1''
Ball diameter:100mm
Section:2 stage
Weight:7.0kg / 15.4 lbs


・Used to mount cameras weighing up to 40 lb (18 kg)
・2-stage design facilitates height adjustment of the tripod from 33.1 to 66.1'' (84 to 168 cm)
・Middle spreader holds the tripod legs firmly providing enhanced stability
・Made of carbon fiber the tripod is lightweight and corrosion resistant
・Supports a wide range of ENG digital camcorders weighing between 17.6 lb (8 kg) and 40 lb (18 kg)
・100 mm half ball for tripod attachment
・Slide plate in head helps in quick removal of the camera
・Knob can be used to adjust the tension to effect continuous counter balance and to help the camera remain stationary at the desired angle of tilt
・Drag control system lets you adjust the amount of resistance during pan or tilt movement so that you have finer control over the shots
・Offers tilt angle of +85 degrees/-85 degrees
・Slide range of +50/-50 mm
・Illuminated bubble level ensures perfect alignment for accurate camera placement and movements


The Acebil PE-82CMX ENG Ball Base Carbon Fiber Tripod with EH-80 Pan/Tilt Head is a lightweight tripod stand with a pan/tilt head designed to mount cameras weighing up to 40 lb (18 kg). A 2-stage design allows you to adjust the height of the tripod from 33.1 to 66.1'' (84 to 168 cm). A middle spreader and rubber feet for the tripod legs provide enhanced stability.

The 2-stage design of the tripod is easy to set up and easy to pack. In addition a middle spreader provides stability by holding the tripod legs firmly so that you shoot blur-free videos. The Acebil EH-80 Pan/Tilt Head is designed to support a broad range of ENG digital camcorders weighing between 17.6 lb (8 kg) and 40 lb (18 kg). Suitable for use in professional broadcast production the head offers a stable base when you swap between large batteries small viewfinders and small LCD prompters. In addition it includes a 100 mm half ball for secure tripod attachment.

Changing the camera position from tripod to handheld becomes easy with the slide plate system. Using a knob you can decrease or increase the tension to effect continuous counterbalance and help the camera remain stationary at the desired angle of tilt.

The drag control system lets you adjust the amount of resistance during pan or tilt movement so that you have finer control over the shots. An illuminated bubble level helps you in getting the perfect alignment and placement for the camera.